What are the steps to reset BIOS to default for a crypto trading rig?

2 answers

• Hyperion LearnerJun 04, 2023 · 2 years ago
  Sure, here's a step-by-step guide to reset the BIOS settings on your crypto trading rig: 1. Start by shutting down your rig completely. 2. Locate the BIOS reset jumper on your motherboard. It's usually labeled as 'CLR_CMOS' or 'RESET'. 3. Use a small screwdriver or a jumper cap to short the two pins of the BIOS reset jumper. This will clear the CMOS memory and reset the BIOS settings to default. 4. After a few seconds, remove the screwdriver or the jumper cap from the BIOS reset jumper. 5. Power on your rig and enter the BIOS setup by pressing the designated key during the boot process (usually Del or F2). 6. In the BIOS setup, navigate to the 'Load Defaults' or 'Reset to Default' option. 7. Select the option and confirm the reset. 8. Save the changes and exit the BIOS setup. That's it! Your BIOS settings should now be reset to default. Make sure to double-check any specific settings you had before the reset and adjust them accordingly. Happy trading!
  968

  484
• Gamer ProNov 10, 2020 · 5 years ago
  Resetting the BIOS settings on your crypto trading rig is a piece of cake! Just follow these steps: 1. Turn off your rig completely. 2. Locate the CMOS reset jumper on your motherboard. It's usually near the CMOS battery. 3. Use a small screwdriver or a jumper cap to short the two pins of the CMOS reset jumper. 4. Keep the jumper shorted for about 10 seconds. 5. Remove the screwdriver or the jumper cap from the CMOS reset jumper. 6. Power on your rig and enter the BIOS setup by pressing the appropriate key during startup. 7. In the BIOS setup, find the option to load default settings or reset to default. 8. Select the option and confirm the reset. 9. Save the changes and exit the BIOS setup. That's it! Your BIOS settings should now be reset to default. Your rig should be good to go!
  795

  265