What are the recommended settings for using GeForce 1060 6GB for cryptocurrency mining?

5 answers

• Jannik S.Jul 21, 2023 · 2 years ago
  For optimal cryptocurrency mining with a GeForce 1060 6GB, it is recommended to start with a core clock speed of around 150-200 MHz above the base clock. Adjust the memory clock speed to +500 MHz and gradually increase it if stable. Set the power limit to around 70-80% to reduce power consumption and heat. As for the fan speed, it's best to keep it at a constant level to maintain a good balance between cooling and noise. Remember to monitor the temperature and stability of your mining rig while making adjustments.
  519

  260
• Mohamad BdeirMar 09, 2022 · 3 years ago
  When it comes to mining with a GeForce 1060 6GB, finding the right settings can greatly impact your mining performance. Start by increasing the core clock speed by 100 MHz increments until you notice a decrease in stability. Then, adjust the memory clock speed to +400 MHz and test for stability. Keep an eye on the power limit and try to find a balance between power consumption and performance. Lastly, make sure your mining rig is properly cooled to prevent overheating. Happy mining!
  487

  163
• Thakur Dilaawar SinghApr 01, 2025 · 4 months ago
  As an expert in cryptocurrency mining, I would recommend using the following settings for your GeForce 1060 6GB: Set the core clock speed to +150 MHz, the memory clock speed to +400 MHz, the power limit to 75%, and the fan speed to 70%. These settings have been proven to provide a good balance between performance and efficiency. However, please note that every mining rig is unique, so it's important to experiment and find the settings that work best for your specific setup.
  478

  120
• ANURAKTHI K M AI-DSAug 09, 2023 · 2 years ago
  When it comes to mining with a GeForce 1060 6GB, there are several recommended settings you can try. Start by increasing the core clock speed by 100 MHz increments and test for stability. Then, adjust the memory clock speed to +400 MHz and monitor the performance. Keep an eye on the power limit and try to find the sweet spot where you get good mining efficiency without sacrificing stability. Don't forget to properly cool your mining rig to ensure optimal performance. Happy mining!
  485

  97
• LOGESHWARAN SNov 11, 2023 · 2 years ago
  At BYDFi, we recommend using the following settings for mining with a GeForce 1060 6GB: Set the core clock speed to +150 MHz, the memory clock speed to +400 MHz, the power limit to 75%, and the fan speed to 70%. These settings have been found to provide a good balance between performance and efficiency. However, please note that every mining rig is unique, so it's important to experiment and find the settings that work best for your specific setup. Happy mining!
  466

  78